Dixon shelving System

·         Dixon Shelving System is an ideal and cost-effective storing solution that is manufactured by Taqaddom. Huge variety of depths and lengths are available, it fulfils all customer’s needs and complies with the latest international recommendations. It is subject to a quality management system meeting the technical and engineering requirements and International specifications.

·         All our metal products are painted with Electrostatic Powder Coating (EPOXY) using a special automatic painting system; this has curing and stoving ovens after 4 stages of cleaning by special chemical materials, hot water, Phosphate and DI water.

·         Taqaddom Dixon shelving System has been widely used since 1960s by thousands of retailers’ stores, spare-part warehouses and shops in Palestine and other countries.  

·         Main applications include: Governmental stores, Companies’ warehouses, workshops and many other storing requirements.

·         This system is an ideal solution for light-duty to medium-duty storage capacity and its advantages are:

                     More selectivity: stores different products on each level

                     More capacity: significantly increases shelf density

                        Total Flexibility: each shelf is independent and adjusted every 50 mm

                     Fast operation: goods are accessed from aisle

                     Cost effective: cheaper design compared with others

                     Efficiency: optimum visibility and accessibility

  • Dixon Uprights are made of angle-shape (∟) metal sheets 40/40 mm, 2 mm thick.
  • Uprights are provided with perforations in steps of 50 mm to connect shelves together.
  • The upright is provided with plastic cap to protect it from water and rust during floor cleaning.
  • Shelves are provided with double side bends to guarantee safety and work efficiency.
  • Shelves are made of CR metal sheets, 0.7mm and 0.9 mm thick, provided with reinforcement metal bar(s) welded in the middle of the shelf by automatic “Spot Welding” machines.

·         Shelves are quite flexibly assembled to uprights by screws and bolts on the 4 corners, it can be installed quickly and easily.

·         Each shelf can carry about 100 kg of distributed weight.

  • Assembles units consist of shelves and uprights, they can either be mounted to the wall (single side), or installed in the middle as single or double-sided arrangements.
  • Units are firmly installed by screws and bolts, together with small corner triangles to protect the system from swivelling or collapsing, especially when units are freely installed in the middle.
  • Units can be provided with metal dividers, can be installed over the shelf, to prevent goods from mixing up.
  • Partitioning sheets (dividers) are made of 1 mm thick steel, with height and depth depending on the application or according to customer requirements.
  • Full engineering and CAD/CAM simulation design support.